Study Shows MicroBiometer® correlates with Chloroform Fumigation Extraction
This article originally appeared on January 27, 2022 at www.microbiometer.com. It is reprinted here by permission.
The gold standard of laboratory soil microbial biomass testing is Chloroform Fumigation and Extraction (CFE). The multiple steps, time, and labor involved with CFE require pricing at up to $500 per sample. CFE works by comparing the difference of chemically extractable carbon between two portions of a soil sample: one that has been treated to break open microbial cell membranes and expose the carbon-containing biological molecules to extraction, and one that has not. The difference in carbon for the two portions is reported as microbial biomass carbon (MBC), in units of µg C/g soil.
microBIOMETER® is calibrated to the same units by a different method. Estimates of bacterial dry mass converge at around one trillionth (1 x 10-12) of a gram (1pg) for a 1 µm bacterium. We measured the area of microbes in known volumes of microBIOMETER® extract (both by manual counting on ahemocytometer and by digital analysis of micrographs) and calculated total microbial mass, which was then converted to µg/g for the whole 0.5 ml sample of soil in the extract. We found that on average, 0.5 ml of soil weighs 0.6 g when fully dried, independent of starting moisture content. The 1 pg dry mass per bacterium is 50% carbon, so we also had to account for that in our calibration. Here's an example of the conversion.
Let's say that in 1 x 10-8 liter (10nl) of microBIOMETER® extract we measured 240 µm2 of microbes. 240 µm2 = 240 bacteria equivalents (BE). 240 BE x 1 x 10-12 g per BE = 240 x 10-12 g of dry microbes. The volume of original extracts is 10 ml (1 x 10-2 liter), and 10 nl of microscopically examined extract represents 1 x 10-8/1 x 10-2 = 1 x 10-6 of the total mass of the microbes in the extract. So 240 x 10-12 g microbes/1 x 10-6 = 240 x 10-6 g microbes in the whole extract. 50% of the 240 x 10-6 g of microbes is carbon, so we have 120 x 10-6 g microbial carbon. We started with 0.5 ml = 0.6 grams of dried soil in the extraction process, therefore 120 x 10-6 g microbial carbon/0.6 g soil = 200 x 10-6 g microbial carbon/ gram soil, or 200 µg microbial carbon/gram soil.
While we arrived at ug microbial carbon/gram soil through a different method than CFE, it turns out our methods are on par with the CFE test. We compared measurements of pµg carbon/gram soil via CFE and microBIOMETER® from 28 soils from across the U.S.
The slope of ~1 of the regression line indicates our units are on a par with CFE, and the 94% correlation indicates that users can be confident that the $10 or less microBIOMETER® test gives results as accurate and informative as the one priced $500.
This is an excerpt from the Early Fall Growers Solution (2023) written by microBIOMETER.
Signup for our newsletter to stay in the loop
